The Fast and Easy Way to Download Windows 10 on a Flash Drive

This topic covers how to manually create a Windows installation flash drive from Windows installation ISO disc image file or DVD, and is intended for manufacturers looking into creating media that they can use to manufacture Windows devices.

The steps described on this page assume you have Windows installation media and access to a Windows technician PC. If you're looking for an easy, automated way to create a bootable Windows installation flash drive, see:

download windows 10 to flash drive

To create installation media, go to the software download website, where you'll find step-by-step instructions. On that website, you can select a version of Windows and create your own installation media using either a USB flash drive or a DVD. To go directly to one of the versions, select one of these links:

A USB flash drive, external hard drive, or DVD. A blank USB flash drive or external hard drive with at least 8 GB of space, or a blank DVD (and DVD burner). We recommend using a blank USB or blank DVD because any content on it will be deleted. When burning a DVD from an ISO file, if you're told the disc image file is too large, you'll need to use dual layer (DL) DVD media.

3. When the program opens, accept Microsoft's terms and conditions, then select Create installation media (USB flash drive, DVD, or ISO file) for another PC, and click Next.

5. Click Next when you've adjusted the options, leave USB flash drive selected, and plug your USB drive into your computer. Select Next to continue.

If it doesn't automatically boot to the drive, you'll need to reboot your computer into its BIOS firmware -- usually done by pressing Esc, F2, or a similar key while the computer is starting up -- and change the boot drive or "bootmenu" to your flash drive. The process for each computer (or motherboard if you're building a gaming PC) will be different. When you first turn on your computer, there'll be a small line of text telling you which button to press to enter BIOS. If you don't see it, or it goes away too fast, I suggest consulting your manual for instructions.

When installing a fresh copy of Windows 10, you typically use a USB flash drive to launch the "Windows Setup" wizard to continue the installation process. However, on a device that has a Unified Extensible Firmware Interface (UEFI) instead of the legacy Basic Input/Output System (BIOS), it is crucial to use the correct media for the firmware type to complete the installation successfully.

On Windows 10, you can use at least two tools to create a bootable USB flash drive. You can use the Microsoft Media Creation Tool to download the files onto a removable drive with support for both firmware types (UEFI and legacy BIOS). Or you can use Rufus, a third-party tool that makes it easy to create a flash drive to install Windows with support for UEFI.

How to make a bootable windows USB install/recovery drive

Download windows 10 from microsoft.com and create installation media

Create installation media for windows 10 using a USB flash drive or DVD

Download windows 10 disc image (ISO file) and burn it to a USB flash drive or DVD

How to install or reinstall windows 10 from a USB flash drive or DVD

Windows 10 media creation tool download and instructions

How to upgrade to windows 10 using a USB flash drive or DVD

How to create a windows 10 bootable USB flash drive using Rufus

How to download windows 10 ISO file without media creation tool

How to fix windows 10 boot problems using a USB flash drive or DVD

How to create a windows 10 recovery drive using a USB flash drive

How to reset or refresh windows 10 using a USB flash drive or DVD

How to download and install windows 10 on a new PC using a USB flash drive or DVD

How to clone windows 10 to a USB flash drive or external hard drive

How to backup and restore windows 10 using a USB flash drive or DVD

How to dual boot windows 10 and Linux using a USB flash drive or DVD

How to run windows 10 from a USB flash drive or external hard drive

How to create a windows 10 live CD/DVD/USB using WinPE

How to test windows 10 compatibility using a USB flash drive or DVD

How to download and install windows 11 using a USB flash drive or DVD

How to create a windows 10 installation USB flash drive for Mac

How to install windows 10 on a Chromebook using a USB flash drive or DVD

How to install windows 10 on a Raspberry Pi using a USB flash drive or SD card

How to download and install windows 10 S mode using a USB flash drive or DVD

How to download and install windows 10 LTSC/LTSB using a USB flash drive or DVD

How to download and install windows 10 Insider Preview using a USB flash drive or DVD

How to download and install windows 10 Education/Enterprise/Pro/Pro for Workstations/Home using a USB flash drive or DVD

How to download and install windows 10 IoT Core using a USB flash drive or SD card

How to download and install windows 10 ARM64 on an Intel/AMD PC using a USB flash drive or DVD

How to create a multiboot USB flash drive with multiple versions of windows 10

How to create a portable windows 10 USB flash drive with persistence

How to create a custom windows 10 ISO file with integrated updates and drivers using NTLite

How to slipstream windows 10 updates into an ISO file using DISM++

How to activate windows 10 after installing from a USB flash drive or DVD

How to change the product key of windows 10 installed from a USB flash drive or DVD

How to transfer files and settings from an old PC to a new PC using a USB flash drive or external hard drive

How to migrate windows 10 from HDD to SSD using a USB flash drive or external hard drive

How to format and partition a USB flash drive for windows 10 installation

How to troubleshoot common errors when downloading, creating, or installing windows 10 from a USB flash drive or DVD

How to speed up the download of windows 10 ISO file using IDM, BitTorrent, or Microsoft Download Manager

Once you complete the steps, the Media Creation Tool will download the files and will create a bootable USB flash drive that you can use to install Windows 10 on computers with support for UEFI and BIOS.

Choose the USB flash drive option. In some cases where you want to keep the Windows 10 ISO file for manual installation to other USB flash drives using a tool like Rufus, you can choose the ISO file option instead.

The Media Creation Tool will download the Windows installation files and prepare the USB flash drive by erasing it and setting up a new partition. It will then copy all the downloaded files onto your USB drive. This will take a bit of time, so be patient.

To create aWindows 10 bootable USB, download the Media Creation Tool. Then run the tooland select Create installation for another PC. Finally, select USBflash drive and wait for the installer to finish.

In order to install the Windows operating system or fix a broken Windows, a bootable USB flash drive is needed. How to create bootable USB from ISO Windows 10/11? A Windows 10/11 USB tool or USB bootable software will be introduced. Besides, the best way to protect the PC against system issues is also told to you.

To install the operating system or to create a rescue disc, it is a choice to burn the operating system into a CD or DVD disc. Though it is nothing hard, the method is clunky, expensive and no-so user-friendly when considering the CD/DVD writer and the cost of an actual CD/DVD disc. Thankfully, you can use a USB flash drive.

Microsoft offers you a utility called Media Creation Tool, allowing you to download a Windows 10 ISO file compatible with your PC or directly create a bootable USB drive so as to install Windows 10. This is the easiest and reliable method. Just follow the step-by-step guide to make bootable USB from ISO.

Step 5: In the following page, you can see two options: USB flash drive and ISO file. Here you can directly choose the former option and make bootable USB from ISO. Please ensure your USB has 8 GB capacity at least.

Step 3: This tool will detect your USB flash drive. You need to click the SELECT button to choose the ISO file you have downloaded, specify the partition scheme and volume label. Then, click the START button to create bootable USB from ISO.

Step 2: Go to the Backup interface, you see system related partitions are selected by default. To back up Windows OS, here you can go to the Destination section to specify a path like an external hard drive, USB flash drive, or NAS.

After finishing the system image backup, you can go to create a bootable USB drive. Just go to the Tools page, click Media Builder, choose your USB flash disk and create USB boot disk from ISO.

Download the iso from the microsoft website -download/windows10. Add the chrome extension chromebook recovery utility. -recovery-utili/jndclpdbaamdhonoechobihbbiimdgai Rename the downloaded file from filename.iso to filename.bin. Launch chromebook recovery utility and click the settings button in the top right corner, select use local image. Select the filename.bin that you downloaded and renamed. Insert and select the usb drive you are putting the iso on, wait for it to load, your done!

There are many posts on the Internet where instructions are given for creating OS X USB installers by using the TransMac and other such applications on a Windows machine. Many of these posts assume one is starting with a disk image (.dmg) file made from an existing OS X USB flash drive installer.

An InstallMacOSX.dmg file for OS X El Capitan, can be downloaded from the Apple website How to download macOS. While this file can be restored to a flash drive, the result is not a working OS X El Capitan USB installer. The same is true for the macOS Sierra file InstallOS.dmg file, which can be downloaded from the same Apple website.

Using Windows to create an USB flash drive OS X El Capitan installer requires third party software beyond just TransMac. The steps below outline one possible method for creating an USB flash drive OS X El Capitan installer using Windows and other free third party tools.

Right click on the USB flash drive icon in the treeview pane, then select "Restore with Disk Image". In the "Restore Disk Image to Drive" popup , choose to "Open" the OS X Install ESD\BaseSystem.dmg Mac disk image file in your Downloads folder as the Disk Image to restore, then select the OK button. Next, select Yes in the "Last Warning!" popup.

Open the Paragon Partition Manager 17 CE application. Select to resize the partition with the Apple HFS volume on the USB flash drive to maximum size, as shown below. Next, select the "Change now" button. When finished, select the "Close" button.

The instructions for using Windows to create an USB flash drive OS X El Capitan installer are given in my first answer. This answer addresses concerns posted by user Fred - with respect to my first answer.

People who are new to computers have one common question about Windows 10: how to transfer files from a flash drive to computer. In this age of online storage, flash drives still help us quickly copy-paste files between computers and smartphones.

So, if you are about to perform a file transfer from the flash drive to a computer Windows 10, then you are at the right place. This article will discuss various methods of transferring files from the flash drive to a computer Windows 10.

One of the biggest drawbacks of copying files using the Windows Explorer method is that it is not fast and indulges too much attention throughout the process. Copy and Paste or Drag and Drop methods are suitable for transferring a small number of files. Fortunately, there is a much faster method that you can use to transfer files from a flash drive to a Windows computer.

Transferring files from the flash drive to Windows 10 PC is a straightforward job. All you need to is connect the USB drive, select files, and copy-paste it to the destination folder. However, it becomes complex if you need to handle more files, and that daily. You can use Windows Explorer for a smaller job, but with the bulk transfer and daily routine, it is better to use software like EaseUS PCTrans.

Microsoft has made Windows 10 version 2004 available to the developer community, a couple weeks ahead of its release to the general public. Like many IT pros with a Visual Studio (formerly MSDN) subscription, I downloaded the ISO file yesterday and set about to copy it to a bootable USB flash drive.

Normally, that's a simple process: First, use the Recovery Media Creator to create a bootable USB flash drive; then double-click the Windows 10 v2004 ISO file in File Explorer to mount it as a virtual drive and drag the contents of the mounted drive to the bootable USB flash drive.

That option works fine when you download the Windows 10 installer files using the official Windows 10 Download page, because those files are packaged specifically for use on USB flash drives. But that page only includes the latest official release. If you're downloading an advance release, as I was, or if you need the previous release, you'll run into an old, familiar, and extremely annoying problem. Instead of completing a simple drag-and-drop copy operation as expected, File Explorer puts up this File Too Large error message: